Mapei Mapesil TILE MATT Silicone Sealant

Description Mapei Mapesil TILE MATT Silicone Sealant is a neutral, mould-resistant silicone sealant with a matt finish and very low emission level of volatile organic compounds (VOC) for ceramic tiles and sanitary ware installations. Available in the following Mapei colours: 100 White, 103 Moon White, 110 Manhattan, 112 Medium Grey, 113 Cement Grey, 114 Anthracite, 120 Black, 130 Jasmine, 132 Beige, 133 Sand and 999 Transparent. It is also available in a low modulus formulation for sealing natural stone – Mapei MAPESIL STONE MATT Silicone. Mapei Mapesil TILE MATT is solvent free with low modulus of elasticity, specifically formulated for sealing ceramics and sanitary ware. Suitable also for the most common absorbent and non-absorbent substrates such as cementitious materials, brickwork, wood, metal, painted surfaces and glass. The product generally has a good bond strength on these substrates also without primer (consult MAPEI Technical Services Department beforehand). Mapei Mapesil TILE MATT Silicone, unlike traditional silicone sealants, features a matt surface finish after polymerisation, for a further aesthetic value in specific architectural works. Thanks to its low modulus of elasticity, Mapei Mapesil TILE MATT is suitable for sealing expansion and fillet joints also in case of great movements both in interior and exterior, such as: Ceramic tiles and coverings, thin porcelain tiles Sanitary ware Rainscreens Prefabricated panels Door and window fittings Similar and/or different covering elements Mapei Mapesil TILE MATT Silicone is a one-component, solvent-free, neutral-crosslinking silicone sealant in a thick paste, to be applied both on horizontal and vertical surfaces. The product can be easily smoothed and trimmed also in case of complex joints shapes. Mapei Mapesil TILE MATT cures reacting to humidity in the air at environmental temperature, forming an adhesive and flexible final product. Seals obtained with Mapei Mapesil TILE MATT do not alter over time, even when exposed to weather, industrial environments, thermal shocks or water; the seals remain flexible at a temperature from -40°C up to 200°C. Mapei Mapesil TILE MATT delays the formation of surface moulds if exposed to damp environments. The resistance of Mapei Mapesil TILE MATT to chemicals is good; however, due to the variety of products and working conditions under which it can be used, it is necessary to carry out preliminary tests in cases of doubt. Mapei Mapesil TILE MATT bonds perfectly to most of the substrates used in building industry without the need for a primer (glass, ceramic, aluminium, galvanized steel sheets, concrete, stainless steel, PVC). In case of prolonged immersion in water or severe mechanical stresses, use Mapei Primerseal A on absorbent substrates and Mapei Primerseal M on non-absorbent substrates. In case of doubt, please consult MAPEI Technical Services Department or carry out preliminary tests. Recommendations: Do not apply Mapei Mapesil TILE MATT on rubber, heavily-plasticised plastics or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond or penetrate into the sealant leading to a variation in colour and mechanical characteristics. Do not smooth the silicone with wet tools or sealants smoothers, so that its natural matt finish is not affected. During reticulation the silicone gives off a characteristic smell: if used in interior, always apply in suitably ventilated areas. Do not use Mapei Mapesil TILE MATT for sealing floors with high level of traffic (use more suitable products such as Mapeflex PU 45 FT, Mapeflex E-PU 21 SL, Mapeflex Xpress 80/400). In case of seals on natural stone do not use a primer. Application Procedure: All the surfaces to be sealed must be dry, sound and free of dust, crumbling parts, oil, grease, wax, old paint and rust. To guarantee that the sealant works correctly, it needs to be free to expand and contract in the joint. Therefore, it Is necessary that: It only bonds perfectly to the side walls of the joint, and not to the bottom; the width of the joint is calculated correctly so that the product does not extend more than 25% of the initial width of the joint; Also, to protect the substrate from staining, apply masking tape along the edges of the joint before extruding and smoothing Mapei Mapesil TILE MATT. Regulate the depth of the joint to avoid the silicone sticking to the bottom by inserting Mapefoam polyethylene foam cord in the joint. Application of the primer: Where the use of Mapei Primerseal A or Mapei Primerseal M is necessary, they must be applied with a brush on the relevant areas of the joints and left to dry for some minutes to allow the solvent to evaporate. Then apply Mapei Mapesil TILE MATT. Application of Mapesil Stone Matt: Mapei Mapesil STONE MATT is supplied in 300 ml cartridges. Cut the tip of the cartridge near the thread and screw on the nozzle. Trim the tip of the nozzle at 45° according to the width of joint required and insert the cartridge into a suitable sealant gun. Finish the surface of the silicone with a dry suitable tool before the skin forms on the surface. Technical Data: Consistency: highly thixotropic paste Density (ISO 1181): 1.23 g/cm³ EMICODE: EC1 Plus – very low emission Application temperature: from 5°C to 40°C Time to form surface skin: 10 minutes Reticulation rate from outside to the inside: – 1 day: 2.5-3.0 mm Tensile strength according to ISO 37: 1.6 N/mm² Elongation at failure according to ISO 37-1: 500% Shore A hardness (ISO 868): 28 Modulus of elasticity at 100% according to ISO 37: 0.4 N/mm² Maximum movement allowed when in service: 25% Resistance to water: excellent Resistance to ageing: excellent Resistance to atmospheric agents: excellent Resistance to chemicals, acids and diluted alkalis: good Resistance to soap and detergents: excellent Resistance to solvents: limited Service temperature: from -40°C to 200°C Product Datasheet Click here to view this product on the Manufacturers website.