Description BAL Micromax Grout Effect Silicone Sealant is a high performance silicone sealant with a unique matt textured grout-effect finish, designed to suit the BAL Micromax 3 ECO Tile Grout Range. Available in the following selection of colours: White, Jasmine, Pebble, Walnut, Hazel, Mahogany, Gunmetal, Smoke, Dovetail, Tornado Sky, Taupe Grey, Storm Grey, Anthracite and Ebony. The textured, matt effect surface finish of this sealant makes it the perfect finishing product for your project when you are looking for your movement joints, perimeter joints and internal corners to match seamlessly with your chosen BAL Micromax3 ECO Grout colour. BAL Micromax Grout Effect Silicone Sealant is for FLOOR and WALL installations and surfaces including sanitary, acrylic, fibreglass, glass, glazed, porcelain and painted in dry and wet interior and exterior environments. Correctly used and applied the bond obtained will be unaffected by weathering, UV radiation and water immersion. It also features built-in Microban® antimicrobial protection to inhibit growth of bacteria (e.g. Listeria, Salmonella, E-Coli) and black mould. This provides added hygiene protection for bathrooms, showers and food consumption areas. BAL Micromax Grout Effect Silicone Sealant is suitable for use in areas such as Leisure Centres, Bathrooms, Changing Rooms, Restaurants/Food Consumption Areas, Domestic Kitchens, Shopping Malls, Breweries, Food/Drink Processing Plants, Hospitals/Dental Practices/Veterinary Surgeries and Clean Rooms. Please note: It is NOT suitable for aquariums, swimming pools, and natural stone. Sets in 24 hours (per 3mm thickness). When fully cured, this silicone has a wide service temperature range (-50°C to 180°C). Coverage: 2.83m/100ml (bead size 6x6mm) Coverage may vary dependent on size of bead. Maximum bead size 25mm. Shelf Life: 12 months under normal dry conditions. Protect from frost and damp. Application: Recommended maximum joint with depth: 6mm. For Movement joints or most applications, use in 6x6mm cross section. 1. Cut off tip of cartridge, ensuring there is enough screw thread to attach the nozzle. 2. The cartridge nozzle should be cut to the required width and angle. 3. Place cartridge in caulking gun and apply steady bead of BAL Micromax Grout Effect Silicone Sealant to required area. 4. The surface of the sealant should be tooled to a slightly concave finish within 10 minutes of application. 5. Smooth silicone with wet silicone tool/spatula or similar (NOTE: dilute soap or detergent solution may be used as tooling lubricants, but excessive use should be avoided as this may affect adhesion at the joint edges). 6. Tools should be cleaned immediately after use with a degreasing solvent. 7. Masking tape must be removed immediately after tooling, before a skin forms on the surface of the sealant, to achieve a neat edge. 8. Allow to cure (approx. 24 hours per 3mm thickness). Product Datasheet Click here to view this product on the Manufacturers website.
