Schluter RENO U Sloped Transition Floor Profile

Description The Schluter RENO U Sloped Transition Floor Profile is a profile for a stepless transition between floor coverings of different heights, for example for the transition from tiles to carpet. In addition, it protects the edge of adjacent coverings. The integrated joint spacer forms a defined joint cavity with the tile. Schluter RENO U has also proven to be reliable in areas subjected to intensive point loads (garages, loading docks, shopping centres etc). Depending on the profile height, the sloping visible surface of Schluter RENO U forms an angle of approx. 17° to 25° and ends with a 4 mm stop edge (except for height H = 3.5 mm). This prevents trip edges between coverings of different heights. The Schluter RENO U Sloped Transition Floor Profile is available in the following material types: E = Stainless steel, 1.4301 (V2A). Available in the following internal height/slope width sizes: 8mm/13mm, 10mm/17.5mm, 11mm/20mm, 12.5mm/23mm, 15mm/28mm, 17.5mm/33.5mm, and 20mm/44.5mm. EB = Brushed stainless steel. Available in the following internal height/slope width sizes: 8mm/13mm, 10mm/17.5mm, 11mm/20mm, 12.5mm/23mm, 15mm/28mm, 17.5mm/33.5mm, and 20mm/44.5mm. A = Aluminium. Available in the following internal height/slope width sizes: 3.5mm/9mm, 8mm/12.5mm, 10mm/16.5mm, 12.5mm/22mm, 15mm/27.5mm, and 17.5mm/27mm. M = Brass. Available in the following internal height/slope width sizes: 3.5mm/9mm, 8mm/12.5mm, 10mm/16.5mm, 12.5mm/22mm, 15mm/27.5mm, and 17.5mm/27mm. AE = Anodised aluminium. Available in the following internal height/slope width sizes: 8mm/12.5mm, 10mm/16.5mm, 12.5mm/22mm, and 15mm/27.5mm. The most popular material/internal height variations are available in either 2.5 metre or 1 metre lengths. Material properties and areas of application: In special cases the suitability of a proposed type of profile must be verified, based on anticipated chemical, mechanical and/or other stresses. Schluter RENO U M are profiles made of brass. Minor manufacturing flaws are unavoidable on their untreated surfaces. They are suitable for absorbing high mechanical stresses. Brass is resistant to virtually all chemicals used in conjunction with tile coverings. When exposed to air, an oxidised layer will form on the exposed visible area of the brass profiles, which leads to a darkening of the finish. This is a natural occurrence with brass and should be expected, domestic brass cleaners can be used to bring back to a shiny brass finish. Exposure to moisture or aggressive substances may result in heavy oxidation and staining at the profile surface. Schluter RENO U A are profiles made of aluminium. Minor manufacturing flaws are also unavoidable on their untreated surfaces. The suitability of the profiles should be reviewed based on the anticipated chemical stresses. Aluminium is sensitive to alkaline. Cementitious materials, in conjunction with moisture, become alkaline, which may result in corrosion depending on the concentration and length of exposure (aluminium hydroxide formation). Any adhesive, mortar or grout must therefore be removed from visual areas immediately. The profile must be solidly embedded in the setting material to prevent alkaline water from accumulating in small cavities. In case of more demanding visual requirements, Schluter RENO U AE or U EB with post-treated, high-quality finishes are available. Schluter RENO U AE is made of anodised aluminium and features an anodised finish that retains a uniform appearance during normal use. The finish may be damaged by aggressive substances or abrasive stresses. Since the effect of tile adhesive, mortar or grout may affect the finish, all contaminations must be removed immediately. Otherwise, the same description as for aluminium applies. Schluter RENO U E/EB are made of stainless steel 1.4301 (V2A) and are particularly well suited for applications that, in addition to high mechanical stresses, require resistance to chemicals such as acidic or alkaline cleaning agents. Even stainless steel is not resistant to all chemical stresses. Substances such as hydrochloric or hydrofluoric acid or certain chloride and brine concentrations may cause damage. In certain cases, that also applies to seawater pools. Special anticipated stresses should therefore be verified in advance. Installation: Select the appropriate Schluter RENO U Sloped Transition Floor Profile according to the tile thickness and the installation method. Fill the hollow space on the underside of the profile with tile adhesive. Apply tile adhesive to the area where the tile covering will end, using a notched trowel. Press the trapezoid-perforated anchoring leg of the Schluter RENO U profile firmly into the adhesive and align it. Trowel tile adhesive over the trapezoid perforated anchoring leg to ensure full coverage. Firmly press the adjoining tiles into place and align them in such a way that the upper profile edge is flush with the tile (the profile should not protrude over the surface of the covering; preferably, it should be approx. 1 mm below the top level of the covering). The tiles must be fully embedded in the area of the profile. The tile is set to the lateral joint spacer, which creates an evenly spaced joint of 1.5 mm. In the case of stainless steel or brass profiles, a joint of approx. 1.5 mm is recommended. Completely fill the space between the tile and the profile with grout. Maintenance: The Schluter RENO U profiles require no special maintenance or care. Oxidation films on brass or aluminium may be removed with a common polishing agent; however, they do reoccur. Damaged anodised finishes may only be repaired by recoating. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Avoid the contact with other metals, such as regular steel, to prevent corrosion. This also includes installation tools such as trowels or steel wool, e.g. for the removal of mortar residue. We recommend the use of the stainless steel cleaning polish Schluter CLEAN CP. Product Datasheet Click here to view this product on the Manufacturers website.