Description The wedi Fundo Ligno Plus Shower Tray is designed to be integrated into wet room or shower installations on suspended timber floors. Only measuring 23mm in thickness at the edges, wedi Fundo Ligno Plus trays can be integrated into a wooden floor covering without building up to further floor height and without the need for time-consuming levelling measures. The drainage outlet exits through the joists below. Each wedi Fundo Ligno Plus Shower Tray has pre-formed surface sloping falls that, when tiled, guide water towards the drainage point of the tray. The drainage trap area of each tray is increased in thickness to 44mm on the underside for strengthening. When installing the tray, a section is to be created between joists underneath the area where the drain outlet is located, to support the concrete mixture that surrounds the drainage trap kit. Alternatively the wedi Fundo Drain Substructure element can be used instead of concrete. This is a specially designed pre-formed foam element that guarantees reliable support and accurate alignment of the drain kit used. Click here to view the installation guidelines. The wedi Fundo Ligno Plus Shower Tray is designed to be used only with the wedi Fundo Shower Drain Kits – these are available in 4 different configurations, and each kit comes with a stainless steel grating and all the fitting accessories. The wedi Fundo Fino Drain Covers range of optional drain covers are also available should you desire a different design of drain grating. Constructed from the same materials as the wedi Tile Backer Board, each tray consists of a blue core made from extruded polystyrene rigid foam that is reinforced with glass fibre (with alkali-resistant finish) on both sides and coated with a polymer-modified cement. This core is 100% waterproof and remains fully functional even after possible damage. The wedi Fundo Ligno Plus Shower Tray is available in a range of different sizes with different drain outlet positions. wedi Fundo Ligno Plus Shower Tray Options: 072070010 – 900 x 900 x 23/44mm, Central Drain 072070017 – 1200 x 1200 x 23/44mm, Central Drain 072070018 – 1500 x 1500 x 23/44mm, Central Drain 072070060 – 1200 x 900 x 23/44mm, Offset Drain 072070061 – 1400 x 900 x 23/44mm, Offset Drain 072070062 – 1800 x 900 x 23/44mm, Offset Drain 072070063 – 900 x 900 x 23/44mm, Corner Drain 072070064 – 1200 x 1200 x 23/44mm, Corner Drain 072070069 – 1600 x 900 x 23/44mm, Offset Drain 072070070 – 1600 x 1000 x 23/44mm, Offset Drain When fitting a wedi Fundo Ligno Plus Shower Tray, use wedi Sealing Tape, Corners & Sealing Gaskets along with wedi 520 Waterproofing Membrane and wedi 610 Adhesive to seal joints between board connections and internal and external corner junctions. We recommend using the wedi Fundo Sealing Set – this complete set contains wedi 520, sealing tape and 2 internal corners for waterproofing up to 10 metres of joints in a shower installation. Technical Data: Extruded polystyrene rigid foam core: XPS Long-term compressive strength (50 years) ≤ 2% compression EN 1606: 0.08 N/mm2 Compressive resistance at 10% compression EN 826: 0.25 N/mm2 Thermal conductivity EN 13164: 0.036 W/mK Bulk density EN 1602: 32 kg/m3 Temperature limits: -50°C / 75°C Fire behaviour EN 13501-1: E Tested waterproofness: 1.5 bar Suitable for wheelchair loading from a minimum tile size of: 50 × 50 mm Glass mosaic from a minimum size of: 20 × 20 mm Standard height of a Fundo Ligno Plus element: Outer edge height: 23 mm Height of the reinforced drain area: 44 mm Product Datasheet Click here to view this product on the Manufacturers website.
