Description Ardex E25 Mortar Admix is an admix for adding to Ardex sub-floor smoothing compounds. Ardex E25 Mortar Admix is recommended for use where: high abrasion or point load resistance is required; where used as a temporary wearing surface; where a floor paint or paint thickness coating is to be subsequently applied as a finish (check compatibility, suitability, and carry out a trial application before proceeding) or where the floor has underfloor heating. In the latter case the heating must be turned off for 48 hours before screeding, left off for a further 48 hours afterwards and gradually brought up to temperature. Ardex E25 Mortar Admix comes in 5kg tubs. Application: The Ardex Smoothing Compound is mixed in the usual way, except that the Ardex E25 Mortar Admix, diluted 1 part by volume with 5 parts by volume of water, is used in lieu of the clean water. The Ardex E25 Mortar Admix additive produces an underlayment with a higher tensile strength and greater elasticity. For Ardex K15 use 6 to 61/4 litres of diluted E25 Mortar Admix (1:5 water) per 22kg bag. Material Requirement: As an admix, a 5kg container, diluted with 5 volumes of water, is sufficient for approximately: 5 x 22kg Ardex K15. Click here to view this product on the manufacturers website. Product Datasheet
