Description RUBI Diamond Hand Polishing Pads are ideal for smoothing and polishing edges, both cuts and surfaces of natural stone and ceramic tiles. The diamond rubber studs on the surface of each pad are semi-flexible and their EVA rubber body allows excellent adaptation to the user’s hand. The holding area has a lateral indentation that increases the ergonomics of the block and reduces hand fatigue during use. RUBI Diamond Hand Polishing Pads have been designed to work manually on those areas where access with power tools is very difficult, such as interior angles, hollow areas or corners and for roughing and smoothing chipped or sharp edges. To achieve a good result, both the type of material and the state in which it is found must be taken into account. RUBI Diamond Hand Polishing Pads can be used dry, but wet use is recommended, either by wetting the block or providing a source of continuous cooling. The range of grit levels consists of #60, #120, #200 and #400 Grit to be able to carry out different polishing and finishing jobs. It is very important that, in polishing work, a gradual degradation is carried out using the different grit levels successively. Starting with the largest grit to the smallest (conversely this means the lower the grit number, i.e 60, the larger the grit). In roughing and/or edge smoothing work, the movement of the block must always go from the top (the most visible) to the bottom. This reduces the risk of chipping or damage to the material. The functions of the different grit levels are: #60, #120 and #200 for roughing. #400 for polishing. For a better finish, it is necessary to be more insistent with larger grains. The dimensions of the diamond plate of the RUBI Diamond Hand Polishing Pads are 55 x 90mm. The dimensions of the rubber pad are 58 x 94 x 30mm. Product Datasheet Click here to view this product on the Manufacturers website.
