Description The RUBI DELTA Tile Levelling System is designed to avoid the creation of tile lippage during the installation of ceramic tiles, both in floors and walls, ensuring that all your tiles are perfectly level with one another. The RUBI DELTA Tile Levelling System is comprised of a thin plastic clip that is designed to be fitted in the grout joint between two tiles. A plastic wedge is then driven by a pair of specially designed pliers into the aperture in the centre of the clip until it sits flush on the surface of both tiles, so that they are both level. Once the tiles have set, the clip is easily broken off by kicking the clip or using a rubber mallet, leaving only its base bedded in the adhesive under the two tiles, which have now set in a perfectly level position. The plastic wedge is fully re-useable, which saves costs on further jobs, as you only need to buy clips. The RUBI DELTA Tile Levelling System clip is available in 1mm, 1.5mm, 2mm and 3mm widths to suit the corresponding grout joint width. These clips are made from different colour plastics for easy identification and are available in multiple bag quantities. The 1mm, 1.5mm and 2mm size clips are designed for use with tiles that are 3-12mm in thickness. The 3mm size clips are designed for use with tiles that are 6-15mm in thickness. Use the consumption table guide to determine how many clip/wedges you will need for your project. A RUBI DELTA Tile Levelling System Kit is also available to purchase separately, which is comprised of 100 Spacer Clips, 100 Wedges and a pair of levelling pliers. This kit is available in 1mm, 1.5mm and 2mm clip size variants. Also available is the RUBI Tile Protector for levelling systems – an anti-scratch plate that is designed to avoid potential accidental damage during installation of tiles that have a particularly delicate top finishing. You place it in between the wedge/screw cap and the tile by inserting it on the levelling clip before wedge/cap application. This prevents scratching delicate tile surfaces by ensuring the wedge/cap does not touch the tile but slides on the protector instead. This protector is compatible with both the RUBI DELTA Tile Levelling System and RUBI CYCLONE Tile Levelling System. This tile levelling system uses special traction-adjustable pliers that facilitate accurate levelling and quick insertion of the wedge in the clips. They also optimize the pressure on the tiles being levelled. Product Datasheet Click here to view this product on the Manufacturers website.
