Description Palace Aqua Ban Waterproofing Membrane is a liquid membrane waterproof tanking system, designed to protect surfaces beneath tiled areas in areas such as wetrooms, showers, bathrooms and swimming pools. Palace Aqua Ban will inhibit the passage of moisture from within the tiled area, into substrates such as plaster, render, plasterboards, tile backer boards, plyboard, suspended floors, anhydrite floors and fibre-board overlays. Palace Aqua Ban Waterproofing Membrane is supplied in 7kg tubs. Palace Aqua Ban Waterproofing Membrane is a one-part waterproof liquid tanking membrane applied by brush or roller over stable surfaces & structures, protecting them against moisture penetration through a tiled surface in locations such as wet-rooms, showers, bathrooms, kitchens & utility rooms where existing surface cracks & joints are no wider than 3mm. When used in conjunction with the Palace Aqua Ban Sealing Kit (reinforcing tape & gaskets), this combination provides the added protection (in accordance with EAD 030352-00-0503) needed to bridge & cover cracks & joints where possible structural movement & vibration is likely to require sealing across wider gaps & joints over 3mm. Properties: Easy to apply with brush or roller. Protective waterproof under-tile coating. Flexibility accommodates movement & vibration. Forms a strong bond to most wall & floor surfaces. Reinforced tape protection around all joints & pipe entry points Suitable for use beneath immersed tiling Recommended areas of use: Interior and exterior elevations Swimming pools and water features Showers, wet rooms and bath surrounds Bathrooms, utility areas and laundries Spas and hot tubs Kitchens and food processing areas Balconies over unoccupied spaces Worktops and facades Steam rooms Recommended Substrates: Plasterboard Plywood Lightweight backer boards Cement backer boards Gypsum plastered walls Cement renders Concrete Existing tiles Anhydrite floor screeds Blockwork Coverage: Depends on the surface texture and porosity, however on a typical smooth, even surface, Palace Aqua Ban Waterproofing Membrane will cover at an optimum rate of no less than 0.5kg per sq.mtr, (1.0 m2 per kg as two coats) and this 7kg pack is sufficient to cover 7 square metres with an average dry coating depth of 0.8mm /- 0.1mm. Technical Data: UNIT SIZE: 7kg kit COLOUR: Grey WET COVERAGE: 0.5KG / per m2 MINIMUM 2-COAT DRY DEPTH: 0.8mm DRYING TIME (1st coat): 1 – 2 hours @ 21°C* DRYING TIME (2nd coat): 2 hours @ 21°C* * Dependent on temperature, substrate and site conditions Product Datasheet Click here to view this product on the manufacturers website.
