Description Tilemaster FAST One Coat DPM Damp Proof Membrane is a two component, solvent free, one coat epoxy Damp Proof Membrane. It’s suitable for use in a one coat application on a wide range of substrates including concrete, sand & cement screeds and calcium sulphate screeds. Tilemaster FAST One Coat DPM Damp Proof Membrane is ideal for use as a damp proof membrane where the residual moisture content in a new or existing cementitious screed is up to 98% Relative Humidity (RH). Tilemaster FAST One Coat DPM can also be used in a one coat application to deal with damp substrates where a structural damp proof membrane is not present or where the structural damp proof membrane is ineffective. Once cured, it produces a membrane which can accommodate hygrometer readings up to 98% RH on cement based screeds, up to 90% RH on heated calcium sulphate screeds and up to 95% RH on unheated calcium sulphate screeds, without resulting in bond strength issues. Tilemaster FAST One Coat DPM has effective resistance to water, grease, oil, dilute mineral and organic acids. Advantages: True One Coat System Fast Curing – Ready To Receive Smoothing Compounds In 4 – 5 Hours Suitable For Use On Surfaces With A Moisture Reading Of Up To 98% RH Can Be Installed Where No Structural DPM Is Present As A One Coat Application. Suitable For Use Over Underfloor Heating systems Use On Heated Calcium Sulphate Screeds With A Moisture Reading Of Up To 90% RH Use On Unheated Calcium Sulphate Screeds With A Moisture Reading Of Up To 95% RH Supplied In Convenient Easy To Use Packaging Coverage: When applied to a smooth surface using an A2 trowel: a 3kg unit of Tilemaster FAST One Coat DPM will cover up to approximately 7.5m2, a 7kg unit will cover up to approximately 17.5m2 and a 14kg unit will cover up to approximately 35m2. For mixing and application instructions, please refer to the manufacturers data sheet linked below. Product Datasheet Click here to view this product on the manufacturers website.
