Schluter DESIGN NICHE Wall Niche
$16.21
$28.37
Description The Schluter DESIGN NICHE Wall Niche range are pre-fabricated niches made of powder coated aluminium with an adjustable frame to vary the depth. They create attractive and practical wall storage. The set includes a Schluter KERDI sealing collar for reliable waterproofing and Schluter-KERDI-FIX sealing adhesive. The niches are available in three different dimensions: 298 x 298mm, 598 x 298mm and 1198 x 298mm (internal dimensions, all sizes have an internal depth of 91.5mm) and five TRENDLINE colours: MBW Matte Brilliant White, MGS Matte Graphite Black, TSBG Textured Beige Grey, TSDA Textured Dark Anthracite and TSI Textured Ivory. The range of Schluter DESIGN NICHE Wall Niches can be installed either vertically or horizontally. All niches are supplied with an adjustable anodised aluminium frame, a prefabricated KERDI sealing collar and Schlüter-KERDI-FIX sealing adhesive. The Schluter DESIGN NICHE Wall Niche in MBW Matte Brilliant White and MGS Matte Graphite Black are colour coated aluminium: The aluminium is pre-treated and powder-coated with a polyurethane covering. The coating is colour-stable and also UV and weather-resistant. The visible edges must be protected against abrasion or scratching. The TSBG Textured Beige Grey, TSDA Textured Dark Anthracite and TSI Textured Ivory finishes are textured finished aluminium. The surfaces have a natural appearance and are designed to match modern stone effect porcelain tile finishes. Using Schluter DESIGN NICHE Wall Niche in conjunction with Schluter-KERDI or Schluter-KERDI-BOARD and the matching Schluter-KERDI-KEBA, installers can create certified bonded waterproofing assemblies. Schluter waterproofing systems have been granted German technical approval (general building authority test certificates, abP) and European Technical Assessment (ETA). Schluter DESIGN NICHE Wall Niche is a component of these waterproofing systems and can be installed in accordance with the DIN 18534 waterproofing standard. Installation in Schluter KERDI BOARD: Make a cut-out by positioning and precisely marking the external dimensions of the niche and the frame. Only the top layer of the frame needs to be cut out (Fig. 1). Completely cut out the wall for the recess in the niche (Fig. 2). Determination of the above dimension. Adjustment range can be selected from 3 mm to 55 mm (Fig. 3). Use the 5 mm spacing grid when using the knurled nut as shown (Fig. 4). Infinitely variable adjustment of the distance by turning the knurled nut (Fig. 5). Apply KERDI-FIX to the recess to bond the spacers, then insert and align the spacers (Fig. 6). Apply KERDI-FIX to the spacers to bond the frame, then insert and align the frame (Fig. 7). Note: For a proper installation, we recommend protecting the outer surfaces of the niche with masking tape (Fig. 7). Use KERDI-FIX to completely fill the joint between the niche and the frame (Fig. 8). The KERDI sealing collar is glued to the frame and the adjacent waterproofing with KERDI-COLL-L (Fig. 9). Then remove the masking tape again. Fresh residues of KERDI-FIX can be removed with spray oil (such as WD-40). The Schluter DESIGN NICHE Wall Niche requires no special maintenance or care. Do not use abrasive cleaning agents on the sensitive surfaces. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Product Datasheet Click here to view this product on the Manufacturers website.
Preformed Tileable Wall Niches