Description The Marmox Floorbacker Single Sided board is a single sided, simple insulating tile backer board made from an extruded polystyrene base, topped with a double layer of fibreglass mesh embedded into a polymer cement surface. Available only in 1250 x 600mm board sizes, and comes in two thicknesses, 6mm and 10mm. The Marmox Floorbacker Single Sided board differs from the standard Marmox Multiboard panel in that it has only one side coated with a cement coating that is reinforced with a fibreglass mesh. Marmox Floorbacker Board is designed to be the most cost-effective way of creating a thermal barrier between cold concrete, or wooden substrates and tiles. The boards are ideal to be fixed directly over the top of plasterboard walls, or sheet wooden floors, using tile adhesive. This creates an insulated and waterproof barrier. Marmox Floorbacker Single Sided boards are NOT suitable for fixing to stud walls. Quick & Easy Installation Installation onto a full bed of flexible adhesive for floors & walls. Marmox Floorbacker is suitable for mechanical fixing onto sheet wooden or concrete floors using fixing screws with either Marmox Plastic Fixing Washers or Marmox Galvanised Fixing Washers. When using Marmox Floorbacker directly behind any wet areas of the room use Marmox Self Adhesive Waterproof Tape on the joints. For tiled floors, such as kitchens or bathrooms, where thermal insulation is required use Marmox Joint Reinforcing Tape to ensure strength between the joints of the Marmox Floorbacker boards. Tile using a good quality flexible adhesive. The Marmox Floorbacker can be used in conjunction with any size of floor or wall tile. Mosaic tiles smaller than 50x50mm must be pre-adhered to a fibreglass or cloth mesh. Technical Data: Compressive Strength-Perpendicular To Surface: 3 kg/cm2, 30 t/m2 Linear Coefficient of Thermal Expansion: 29 X 10-6 Thermal Conductivity: 0.034 W/m.K Thermal Resistance (20mm thick): 0.6 m 2 K/W Robinson Floor Test: Extra Heavy Duty & High Impact Use Water Penetration: Passed – No Water Penetration Flammability: EN 476-6,7;Class 0 – EN 13501;Class E Surface Burning Characteristics: Flame Spread 0, Smoke Developed 70 Accelerated Aging: Passed – No Blistering or Delamination Capillarity: 0 Waterproof: Passed Fungus/Bacterial Resistance: Passed – No Growth Temperature Limits: -50 to 75 °C, -58 to 168 °F Global Warming Impact: Index of 1 (No Negative Impact) Dimensions: 1250 x 600mm Thickness: 6mm, 10mm Colour: Foam – Blue, Polymer Cement Coating – Blue Weight: Approx 2–3 kg/m² (Dependent Upon Thickness) Warranty: 10 Years Product Datasheet Click here to view this product on the Manufacturers website.
