Description UltraTile ProGrout Flowable Tile Grout is a high-performance, polymer-enhanced flowable tile grout designed for areas prone to movement or vibration. Polymer has been added to the formulation to increase flexibility and to provide a virtually impermeable set. UltraTile ProGrout Flowable is suitable for joint widths up to 20mm and depths of 30mm. UltraTile ProGrout Flowable Tile Grout is available in the following colours: Limestone, Silver Grey, Grey and Charcoal. All UltraTile ProGrout Flowable Tile Grout colours are supplied in 15kg bags. Surface Preparation: Ensure that the tile adhesive is completely set and that the tiles are firmly fixed. All joints should be free from excess adhesive, dust, grease or any other contaminants. Ensure all open ended joints (such as steps) are plugged to prevent grout flowing out. Mixing: UltraTile ProGrout Flowable Tile Grout should be added slowly to 2.7 litres of clean water in a suitable mixing vessel. Mix until a smooth consistency is achieved, leave to stand for 2 minutes then remix. Do not mix more than can be used in a 30-45 minutes period, do not rewet or add too much water. This will cause a weakening of the grout and a tendency to crumble. In certain cases this may also lead to discolouration in the form of efflorescence. Application: UltraTile ProGrout Flowable Tile Grout should be applied to the surface using a rubber backed trowel or squeegee. Work the mixed material thoroughly into the joints a small area at a time. After at least 40* to 50* minutes, any residue left on the face of the tiles can be removed by using a washboy or pedalo. Any dry film remaining once the job is complete can be polished off the face of the tiles with a soft dry cloth. Finishing when the grout is not firm to the touch, may lead to joints being emptied or potential colour variation. Technical Data: Unit Size: 15kg Bags Colours: Limestone, Silver Grey, Grey & Charcoal Classification: EN13888 CG2 WA Joint Depth: 2mm – 30mm Initial Drying Time*: 40-50 Minutes Pourable Time*: 15 Minutes approx Pot Life*: 30-60 Minutes Light Foot Tra”c*: 3-4 Hours Hard Set Time*: 12 Hours Application Temperatures: 5°C to 25°C Product Datasheet Click here to view this product on the Manufacturers website.
