Description The Mapei Mapeheat Thermo Touch Thermostat is an “in wall” mounted gloss finish programmable thermostat for the Mapei Mapeheat Membrane & Cable floor heating system. Features & Benefits: • Large clear display • Intelligent leaf button: – Changes operating modes, turns the thermostat ON/OFF, saves changes & energises the thermostat when in standby mode (motion sense technology) • Built-in 4 event timer function • 2 operation modes: Manual on/off programme (1 temperature set-point) & 1 editable pre-programme (4 temperature set-points per day) • 3 Sensor modes: Room sensing only / Floor sensing only / Room sensing mode with floor temperature limiter • Easy navigation • The Mapei Mapeheat Thermo Touch Thermostat comes with a manufacturers limited 2 year warranty. The Mapei Mapeheat Thermo Touch Thermostat is supplied complete with floor sensor, adaption frame and installation manual. Technical Data: Supply voltage: 230 VAC ( 10% / -15%) – 50 Hz Relay output: 230 VAC, maximum 13A resistive load (max. 3000W) Power consumption (Stand-by): 3VA Ambient operating temperature: 0°C to 40°C, 5% to 95% RH (non condensing) Switching hysteresis: 1K (Factory settings adjustable between 0.5 – 2.0K) Terminals: Max. 2.5 mm² Protection class: IP 21 Sensor: The Mapei Mapeheat Thermo Touch Thermostat features an external floor sensor (range 5°C to 35°C) – With 3 meter cable (max. extension 100 m with 2 x 1.5 mm²) – Type NTC 10K at 25°C Internal room sensor (range 5°C to 40°C) Transport – Ambient temperature: –10°C to 60°C Approvals: CE, UKCA, RoHS, WEEE Product Datasheet User Manual Click here to view this product on the manufacturers website.
