Description The Schluter DITRA HEAT E R4 Thermostat is a basic manual thermostat for use with the Schluter DITRA HEAT Electric Underfloor Heating System. The Schluter DITRA HEAT E R4 Thermostat features a user-friendly interface that has an on/off switch and a dial for setting the temperature set-point. This thermostat is rated with a 16 Amp switching capacity at 230v – this equates to a maximum output of 3680 Watts. It comes with two remote temperature sensor probes – both should be installed but only one connected – so that you can use the spare one as a backup should the primary one fail. This sensor probe is also available to purchase separately – Schluter DITRA HEAT E Temperature Sensor Probe. The temperature will be controlled according to the temperature measured by the remote sensor. The heater will be switched on when the temperature drops below the current set point. For more information on this thermostat refer to page 12 & 13 of the Instruction Guide and page 8 of the Product Data Sheet for the Schluter DITRA HEAT System, linked below. Also watch the video dedicated to the installation and settings below. Installation Guide Product Datasheet Click here to view this product on the Manufacturers website.
