IRCITY.FR ≡ Album Waterproofing Tapes, Mattings, Pipe & Corner Seals Accessories Celtic Cd
  • Electric Underfloor Heating Systems

  • Schluter DITRA HEAT E HK Cable

Schluter DITRA HEAT E HK Cable

$16.37 $21.94
Description The Schluter DITRA HEAT E HK Cable is an electrical under tile heating cable with a unilateral connection for installation in the Schluter DITRA HEAT Matting and DITRA HEAT DUO uncoupling matting. The Schluter DITRA HEAT E HK Cable is available in 18 different lengths for single zones. Note: these cables must not be shortened. When selecting the heating cable for your application, please note that the table below with the heated space in m² does not specify the room size. To determine the heated space, deduct unheated zones such as perimeter areas and storage space from the room size. The Schluter DITRA HEAT E HK Cable can be installed in the matting on both walls and floors. It is recommended to set the spacing of the cable at 3 studs apart in the matting for floors, this gives a heat output of 136 W/m². For walls, the cables can be set at 2 studs apart – this gives a heat output of 200 W/m². The Schluter DITRA HEAT E HK Cable is easily installed in the matting by using an old grout float to press the cable down in between the studs. Use the Schluter DITRA HEAT E KARO Cable Dispenser to make installation of the larger size cables easier and more efficient. Important: Testing of the cable must be carried out prior to installation, and again after installation of the heating cable and before tile/stone floor finish is installed. To test the resistance of the heating cable use the Schluter DITRA HEAT E CT Cable Tester with inbuilt alarm. See the table above for Ohm figures for each cable length (Art. No.). Technical Data: Nominal voltage: 230 Volt Rating: 136 W/m² (spacing: every third stud ≙ 9 cm) 200 W/m² (spacing: every second stud ≙ 6 cm) Cold connection line: 1 x 4,00 m Minimum installation temperature: 5 °C Smallest bending radius: 6 x dA Resistance tolerance: -5 % / 10 % VDE tested IEC 60800 Class M1 Cold-warm transition: Seamless, without shrink technology Insulation: Fluoroplastic Fuse model: IPX7 Installation Guide Product Datasheet Click here to view this product on the Manufacturers website.
Electric Underfloor Heating Systems

Electric Underfloor Heating Systems

  • Amber DT-two Thermostat
    $29.45 $41.82
  • Mapei Mapeheat Thermo Touch Thermostat
    $33.11 $56.62
  • Touchscreen Programmable Thermostat
    $17.55 $21.59
  • Progress Profiles Prodeso Heat Grip 5 Cable
    $30.73 $53.47
  • Progress Profiles Prodeso Heat Thermostats
    $10.67 $19.74
  • Schluter DITRA HEAT Conduit Installation Set
    $22.43 $32.75
  • Amber Heating Cable
    $27.31 $50.8
  • Amber DT-two WiFi Thermostat
    $11.28 $18.05
  • Mapei Mapeheat Membrane / Cable
    $33.61 $43.02
  • ThermoSphere Contactor Snubber Unit
    $33.8 $55.43
  • Amber Electric Underfloor Heating Mat
    $14.24 $20.93
  • Progress Profiles Prodeso Heat Underfloor Heating Kits
    $13.65 $16.65
  • Comfortzone Electric Underfloor Heating Cable
    $13.46 $22.75
  • Mapei Mapeheat Thermo Basic Thermostat
    $18.13 $25.38
  • ThermoSphere T-MO Smart Thermostat
    $27.79 $53.63
  • ThermoSphere Foil Underfloor Heating
    $28.73 $37.92

© 2026 - IRCITY.FR