Description Kerakoll Fuga Soap Epoxy Grout Cleaner is an effective and specific detergent for use in cleaning after grouting with epoxy grouts such as Kerakoll Fugalite Color, as well as in the routine maintenance of ceramic tiles, porcelain tiles and natural stones. Kerakoll Fuga Soap is a water-based concentrate, which safeguards the health of both operators and the environment. It can be used on both floors and walls, in any dilution ratio with water. It is suitable for use with compact and porous materials, delicate marbles and is ideal also for domestic environments. Kerakoll Fuga Soap can be used on ceramic, porcelain tiles, glass mosaic, marble and natural stone tiles. We recommend using Kerakoll Fuga Wash as an additive in the wash-water to minimise streaking and facilitate cleaning when grouting with Kerakoll Epoxy Grouts. Instructions for use: Preparation of substrates: The coating materials must first be cleaned to remove any dust. Kerakoll Fugalite Color must be fully hardened. Preparation: Kerakoll Fuga Soap is a ready-to-use yellowish liquid, water-dilutable in any ratio depending on the type of dirt to be removed. Shake the bottle well before opening in order to redisperse the liquid evenly. Dilute 1:1 to 1:3 using warm water depending on the type of dirt to be removed. Application: It is advisable to perform a preliminary test on tiles that are not to be laid, or in a concealed area. Apply Kerakoll Fuga Soap evenly to the surface to be cleaned with a white rough scrubbing pad and leave it until the dirt to be removed begins to visibly lift; this may take a few minutes or up to 10 – 15 minutes depending on the quantity, the elapsed time after laying (at least 24 hours) and the degree of absorption of the surface. Scrape the surface mechanically with abrasive felt pads. (we recommend using the Kerakoll Abrasive Felt Pads). Once cleaned, rinse well and dry carefully. The use of wet vacuum makes the operation easier and ensures the complete removal of residue. In the case of large surface areas, a mechanical buffer with an abrasive felt pad for the removing operation is recommended. Repeat for highly stubborn dirt. Cleaning: Residues of Kerakoll Fuga Soap can be cleaned from tools by rinsing them thoroughly with water. Technical Data: Appearance: yellowish liquid Specific weight: ≈ 1.01 kg/dm3 Shelf life: ≈ 24 months in the original packaging Warning: protect from frost, avoid direct exposure to sunlight and sources of heat Pack: bottles 1 ℓ Water dilution ratios: from 1:1 to 1:3 Viscosity: ≈ 211 mPa · s, rotor 2 RPM 50 Brookfield method pH: ≈ 12.5 Temperature range for application: from 5 °C to 35 °C Waiting time before cleaning with water: ≈ 10 – 30 min. Coverage: ≈ 20 m²/1 l with 1:1 dilution, ≈ 40 m2/1 l with 1:3 dilution Product Datasheet Click here to view this product on the manufacturers website.
