Description LTP Stone Oil is an oil based impregnating sealer for interior and exterior use on most natural stones such as travertine, limestone, sandstone, slate, marble, granite as well as porcelain, terracotta, quarry tiles, brick and external paving. LTP Stone Oil is easy to apply and strongly enhances the appearance. Directions for use: Shake well. Surfaces should be completely clean & dry. Apply LTP Stone Oil sparingly using a soft cloth, paint brush or sealant applicator pad to the surface. Remove unabsorbed excess within 1 hour. Porous surfaces may require more than one application. Leave LTP Stone Oil to cure for a minimum of 24 hours before allowing traffic. Keep as dry as possible for the first 3 days. External surfaces: no further treatment necessary. Internal surfaces: can be finished with LTP Colour Intensifier or LTP Clear or Antique Wax or LTP Ironwax Satin or Gloss. Important: Used cloths should be burnt as they may spontaneously combust. Allow good ventilation during application. Avoid working in direct sunlight; rapid oxidization may inhibit effectiveness. Excess sealer that is left to dry on the surface can be removed with white spirit. Coverage: Lower porosity floors (250ml per 5 m²) per 10 m² approximately 1 litre Medium porosity floors (250ml per 2 m²) per 10 m² approximately 2 litres Storage: Store in a cool, dry, frost-free environment. Shelf Life – Up to 4 years for un-opened containers. Health & Safety: Contains: Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics. May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have product container or label at hand. Keep out of reach of children. IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician. Do NOT induce vomiting. Store locked up. Dispose of contents/container in accordance with local authority requirements. EC Label EC No 1272/2008 Product Datasheet Click here to view this product on the Manufacturers website.
