Description Lithofin KF Stain Stop is a special product from the LITHOFIN-Range for ceramic and quarry tiles (KF). It is a ready-to-use special impregnator which is solvent based and contains high quality water and oil resistant components. Lithofin KF Stain Stop penetrates into the surface and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed by the surface, but instead remain on the surface. During this time, dirt can easily be removed without leaving stains. The effectiveness of the products depends on the amount of product absorbed by the surface. The characteristic appearance of the surface material is not or only slightly altered. Lithofin KF Stain Stop is for protecting unglazed ceramics such as quarry tiles against stains and for facilitating every-day maintenance. Highly recommended for use in kitchens, bathrooms and other areas which may come into contact with water and oil. Please Note: does not or only slightly affects the slip resistance properties of the surface. Technical Data: Density: approx. 0,78 g/cm³ Appearance: liquid, colourless, clear Odour: aromatic pH-Value: n.a. Flash Point: approx. 23°C Reduction in Water Absorption: 90 to 95% Application Temperature: the temperature of the surface should be between 5°C and 25°C. Switch off under floor heating. Drying Time: most solvents will evaporate within two hours. Lithofin KF Stain Stop will be fully effective after approx. 48 hours. Coverage: Depends on the absorbency of the material. Estimates: clay slabs: 4 to 8m²/litre unglazed quarry tiles: 8 to 12m²/litre Durability: 3 to 5 years in outdoor areas. Indoors, the durability depends on the care products used. Strong de-greasing or layer forming products are not suitable. For regular maintenance, we recommend Easy Care. Storage: Keep closed, cool and dry. Shelf life of up to 3 years. Open containers should be used quickly. Click here to view this product on the manufacturers website. Product Datasheet
