Description Lithofin OIL EX is a ready-to-use, gel-like paste consisting of a mixture of solvents and highly absorbent solids that dissolves and absorbs oil and oil based dirt. Lithofin OIL EX has a paste like consistency that enables the active ingredients to work on the substrate for a long time, so that even deeply ingrained dirt can be successfully removed. Lithofin OIL EX is for removing oil stains or grease based dirt from marble, natural and artificial stone, concrete, etc. Ideal for kitchen work tops, garage entrances and similar areas. Technical Data: Density: approx. 0,8 g/cm³ Appearance: paste, whitish Odour: aromatic pH-Value: n.a. Flash Point: > 21°C Solubility in Water: — Directions for Use: Remove solids and surface soiling mechanically using a scraper or a brush. Apply Lithofin OIL EX to the dry surface using a spatula, so that a coating thickness of at least 2mm is achieved. Allow to dry for approximately 12 hours. The remaining powder can be brushed off after complete drying. Please Note: some dark natural stone can show small amounts of the powder in the porous surface. If this happens please clean with MN Power-Clean. Deeply ingrained dirt can be removed by 2 or 3 applications. The active working time of the product can be prolonged by covering the area with plastic film. Do not apply under -10°C or over 25°C. Do not use Lithofin OIL EX on surfaces which are sensitive to solvents, lacquered, coated or synthetic surfaces. It is recommended to try the product on a small area in an inconspicuous place. Coverage: approx. 0,5m² / kg for 2 mm application thickness Advice: we recommend impregnating stain sensitive stone and concrete areas with MN Stain Stop. For regular maintenance use MN Wash & Clean or EASY CARE. Storage: Store in cool and dry conditions. Keep tube closed. Shelf life of up to two years. Click here to view this product on the manufacturers website. Product Datasheet
