Mapei UltraCare Epoxy Off Gel – Epoxy Grout Residue Remover

Description Mapei UltraCare Epoxy Off Gel is a special high-viscosity cleaner for removing epoxy grout residues. Thanks to its viscosity, it is ideal for application on walls. It is designed for the removal of epoxy grout residues, such as those left after applying Mapei Kerapoxy, Kerapoxy CQ, Kerapoxy Easy Design, etc., on ceramic or glass mosaic surfaces. Mapei UltraCare Epoxy Off Gel is suitable for use on non-absorbent materials such as porcelain, glazed ceramic and glass surfaces. Mapei UltraCare Epoxy Off Gel is a concentrated gel that is ready to use. It removes any residues, stains or epoxy grout halos without developing harmful emissions. The correct use of the product does not damage either the surface of the installed glass or ceramic or the grout joints. Thanks to its viscosity, it is ideal also for application on vertical surfaces. CAUTION: • Do not use this product on polished marble or polished natural stone. • Do not use on wood. • Do not use on methacrylate baths. • Before using the product on materials whose surface strength is not known, carry out an application test to verify that the surface is not damaged. • Before use protect all surfaces that may be damaged by direct contact with the product. • Mapei UltraCare Epoxy Off Gel does not damage metal or galvanized surfaces; however, given the variety of materials available on the market, a preliminary test is always recommended. Application Method: Shake the product before use. The product is ready to use and does not need to be diluted. Apply Mapei UltraCare Epoxy Off Gel to the surface to be cleaned using a brush or a roller and then leave to act for a few minutes (approximately 15-20 minutes according to the degree of dirt). Work over the surface with a Scotch-Brite® pad and then rinse well with plenty of clean water. On freshly applied grout cleaning is very effective; when cleaning epoxy residues that have been cured over a period of time or particularly stubborn grout residues, it may be necessary to let the product act for longer (up to 30 minutes) or you may need to repeat the cycle. For applications on flooring it is possible to carry out cleaning with single-disc cleaning machine. Consumption: With 1 litre of UltraCare Epoxy Off Gel it is possible to clean up to a maximum of 15 m² of surface. Consumption may vary according to the surface to be treated and the degree of dirt. Technical Data: Consistency: liquid Colour: opalescent Density: 1.10 g/cm³ pH: 9 Application temperature range: 0°C to 40°C Waiting time before rinsing: 5 minutes Product Datasheet Click here to view this product on the Manufacturers website.