Description The Schluter VINPRO RO LVT Corner Edge Protection Profile is a special finishing profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner and conceals the edges of the adjoining covering. The profile is attached to the wall with matching screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX). The Schluter VINPRO RO LVT Corner Edge Protection Profile is available in the following finishes: ACGB = Brushed chrome anodised aluminium ATGB = Brushed anodised titanium aluminium (colour may differ from other Schlüter profiles in ATGB finish) ABGB = Brushed antique bronze anodised aluminium Each finish option is available in the following internal height sizes: 3, 4, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 10, 11, 12.5mm. All profiles are supplied in 2.5 metre lengths. In applications exposed to chemical or mechanical stresses, the profile’s suitability must be verified. The information provided below is intended as a general guideline. Anodised aluminium: The aluminium features an anodised finish that may be damaged by aggressive substances or abrasive stresses. Damage to the anodised surface can be restored with paint. Installation with screws: Select the appropriate Schluter VINPRO RO Profile according to the thickness of the covering. Transfer the positions of the drill holes to the substrate at the edges of the covering and drill holes with a diameter of 5 mm for the screw anchors. Attach the profile to the floor with counter-sunk screws, Ø 3.5 mm. Follow the manufacturer’s specifications for installing the covering. Installation using an adhesive: Select the appropriate Schluter VINPRO RO Profile according to the thickness of the covering. Adhere the profile with the installation adhesive Schluter KERDI FIX or an equivalent material at the edges of the covering. This installation method is especially suitable for areas where the profile cannot be screwed into the floor. Follow the manufacturer’s specifications for installing the covering. Note: The substrate must be load-bearing and free from debris. The Schluter VINPRO RO LVT Corner Edge Protection Profile requires no special maintenance or care. Do not use abrasive cleaning agents on the sensitive surfaces. Damage to the anodised surface can be restored with paint. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Product Datasheet Click here to view this product on the Manufacturers website.
