Description The Schluter TREP EK Stair Nosing Profile is a version of the Schluter TREP E profile without an anchoring leg for adhering to the edges of existing stair nosings. The profile is well suited for retro-fit installation over damaged edges, eliminating the need to replace the entire step. This stair nosing profile comes in one size only and is available in 2.5, 1.5 and 1 metre lengths. The Schluter TREP EK Stair Nosing Profile protects the front edges of stairs and adds a high degree of safety due to the special slip resistant design of the tread (test certificate by the Institute for Occupational Safety (IFA), slip resistance classification group R10 V6) and the excellent visibility of the step nosings. This profile is made from standard stainless steel (V2A) and is particularly well suited for applications that, in addition to heavy mechanical stresses, require resistance to chemicals (e.g. exposure to acids, alkalis, oils, greases and solvents). However even stainless steel is not resistant to all chemical stresses, and may be affected by hydrochloric and hydrofluoric acid or certain chloride and brine concentrations. Schluter TREP EK Stair Nosing Profile Installation: Clean the stair nosings and repair damaged areas if necessary. Clean and degrease the underside of the profiles. Adhere the profile by fully embedding into a suitable adhesive (e.g. epoxy resin or Schluter KERDI FIX adhesive, depending on the substrate). Note: The upper profile edge is approx. 2.5 mm higher than the stair covering. Product Datasheet Click here to view this product on the Manufacturers website.
