Description Schluter JOLLY TSI Ivory Tile Trim is a premium finishing profile that offers excellent edge protection for external corners of tiled walls. It has a powder coated, natural ivory textured finish. Schluter JOLLY TSI Ivory Tile Trim has a right angled profile geometry that forms a neat finish for tile coverings. Other applications include skirtings and transitions for coverings such as carpet, natural stone, or epoxy resin coverings for wall areas. In addition to the profile’s decorative effect, the tiles are protected against damage caused by mechanical stresses along the edges. Schluter JOLLY TSI Ivory Tile Trim features joint spacers on both sides to create a uniform grout joint with the tile. The geometric undercutting offers additional bonding surface for the grout. Pre-fabricated corner pieces and the newly developed plug-in connection allow for creating neat and decorative corner connections. The corners are supplied with innovative plastic connectors that serve as installation aids. Matching connectors are available to create simple and elegant connections of multiple JOLLY profiles. Schluter JOLLY TSI Ivory Tile Trim features a natural, powder coated textured finish that retains a uniform appearance during normal use. The aluminium is suitably pre-treated and then powder-coated with a polyurethane covering. The coating is colour-stable, as well as UV- and weather-resistant. Visible edges should be protected against abrasion. Schluter JOLLY TSI Ivory Tile Trim is available in the following internal height sizes: 6mm, 8mm, 10mm, 11mm, 12.5mm, 14mm, 16mm and 21mm. All sizes come in lengths of 2.5 metres. Installation: Select the appropriate profile height of Schluter JOLLY TSI Ivory Tile Trim according to the tile thickness and the installation method. Apply tile adhesive to the area where the tile covering will end, using a notched trowel. If the JOLLY profile is to be installed in wall corners, complete the tiling of one wall, then apply tile adhesive in the corner area of the second wall. Firmly press the trapezoid-perforated anchoring leg of the JOLLY profile into the adhesive and align it. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. Fully embed the adjoining tiles and adjust them in such a way that the upper lip of the profile is flush with the tile. Note: The profile may slightly protrude or be recessed in the wall area to offset dimensional variations in the covering material. Set the tile to the lateral joint spacer to ensure a uniform joint. Completely fill the space between the tile and the JOLLY profile with grout. Use suitable materials and tools for the sensitive surfaces to avoid scratches or other damage. Setting materials must be removed immediately, especially on aluminium. External wall corners can also be created with mitre cuts or with the optionally available external Schluter JOLLY TSI Ivory Tile Trim corner pieces. If using an external corner piece, the supplied plastic pins serve as an alignment aid between the profile and the corner piece. The application of grout then gives the assembly the necessary strength. Note: To securely position the corner piece during installation or grouting, we recommend additional stabilising of the corner, for example with adhesive tape, particularly if only one plastic pin is used. Product Datasheet Click here to view this product on the manufacturers website.
