Description Genesis EVC PVC Vinyl To Tile Capping Trim is a profile that offers a neat transition between soft vinyl flooring and ceramic tiles in skirting areas. Extruded from UPVC, this trim features a 3mm gap for the vinyl to sit within, transitioning into a 8mm or 10mm (white only) high square profile that sits against the tile edge. Genesis EVC PVC Vinyl To Tile Capping Trim is available in 3 colours: White, Grey and Black. Each colour is supplied in 2.5 metre lengths. UPVC is particularly suitable for a wide range of application due to its excellent chemical resistance, however note the following: It is not recommended for use above 60°C resistant to most oils, alcohols, petrol and fats. It is unsuitable for use in contact with aromatic and chlorinated hydrocarbons, ketonesm nitro compounds, esters and cyclic ethers with cause some swelling. Installation: 1. Measure and cut the Genesis EVC PVC Vinyl To Tile Capping Trim profile to the desired length. 2. If fixing during tiling installation trowel adhesive onto substrate and bed the profile into position ensuring the adhesive penetrates through the holes in the anchoring flange. 3. Trowel the adhesive over the holes and position tiles accordingly. 4. Tuck the vinyl flooring material into the cavity below. 5. Apply silicone or similar sealant if required to provide a complete seal. Maintenance: Genesis EVC PVC Vinyl To Tile Capping Trim requires no special maintenance. Clean periodically using a neutral detergent to maintain the appearance. Regular cleaning aids the longevity of the profile. Product Datasheet Click here to view this product on the Manufacturers website.
