Description The Schluter LIPROTEC Power Supply Unit is for use with the Schluter LIPROTEC EASY range of plug-and-play LED tile trim profiles. It converts the mains voltage to the 24v required by the Schluter LIPROTEC LED Strips. It is easy to install and is available in 4 different wattage outputs to cater for powering LED strip lengths up to a maximum of 6 metres of RGB W LED strips or 18 metres of standard warm white/neutral white strips. Each Schluter LIPROTEC EASY LED Module has a rated W/metre output which can be used to determine which power supply is required to power your particular installation of LIPROTEC profiles. The standard warm white and neutral white LED profiles require 5W per metre and the RGB W LED profiles require 15W per metre. Schluter LIPROTEC Power Supply Unit Outputs: 30W (Max load 27W) – can power up to 5.4 metres of standard white LED or up to 1.8 metres of RGB W LED modules 50W (Max load 45W) – can power up to 9 metres of standard white LED or up to 3 metres of RGB W LED modules 75W (Max load 67.5W) – can power up to 15 metres of standard white LED or up to 5 metres of RGB W LED modules 100W (Max load 90W) – can power up to 18 metres of standard white LED or up to 6 metres of RGB W LED modules Each unit comes equipped with a Euro plug connection and a plug-and-play connector for the Schluter LIPROTEC EASY system. Compatible with the Schluter LIPROTEC EASY Connector Extension Cables and Distributor Y-Switches, and the Schluter LIPROTEC Bluetooth Wireless Control adapters. LIPROTEC Catalogue Click here to view this product on the Manufacturers website.
